User Manual Q&AAnswer
Feb 15, 2025 - 03:02 AM
The installation process for the Fangfei Custom Welcome LED Lights Car Projectors is relatively simple. Here are the steps to install them:
1. Start by cleaning the surface of the car door where you plan to install the projectors. Use a soft, damp cloth to remove any dirt or debris.
2. Take one of the magnet plates and attach it to the back of the projector light using the provided 3M sticker.
3. Peel off the backing of the 3M sticker on the magnet plate and firmly press the projector light onto the desired location on the inside of the car door. Make sure it is securely attached.
4. Repeat the same process for the second projector light on the other car door.
5. Once the projector lights are installed, test them by opening and closing the car doors. They should automatically turn on when the door is opened and turn off when the door is closed.
Note: It is important to ensure that the projector lights do not interfere with the normal operation of the car door or obstruct the driver's vision. Adjust the positioning if necessary.
For a visual demonstration of the installation process, you can refer to the unboxing video provided in the manual.
If you have any further questions or need assistance, please refer to the Fangfei Custom Welcome LED Lights Car Projector User Manual for more detailed instructions.
Add New Comment