User Manual Q&AAnswer
Feb 15, 2025 - 02:49 AM
To pair the remote control with the Mengshen Bicycle Wireless Anti-Theft Security Alarm, follow these steps:
1. If you have the original remote control:
- Press the second key of the original remote control once.
- Long press the fourth key of the original remote control and don't release it. The bicycle alarm will emit a long sound twice. After 5 seconds, there will be a short sound.
- Release the fourth key of the original remote control.
- Press the second key of the unpaired remote control once. The alarm will ring "Bi Bi," indicating that the pairing is successful.
2. If you don't have the original remote control:
- Use a screwdriver and the blue tool to open the alarm.
- Lift one battery and wait for 10 seconds.
- Reinsert the battery.
- Long press the last key of the remote control for about 6 seconds until the alarm rings "Bi."
- Finally, press the second key once, and the alarm will ring twice "BiBi," indicating that the pairing is successful.
For visual instructions, you can search "Mengshen direct" on YouTube to find relevant demonstration videos.
Please refer to the Mengshen Bicycle Wireless Anti-Theft Security Alarm User Manual for more detailed information and troubleshooting tips.
Add New Comment