User Manual Q&AAnswer
Feb 15, 2025 - 02:45 AM
To measure DC voltage with the NOYAFA NF-5310B Mini Pen Multimeter, follow these steps:
1. Insert the black test lead into the "COM" tail jack and ensure the positive electrode is connected to the tip of the test pen.
2. Ensure the meter is in the automatic scanning state, which is indicated by the display showing "AUTO".
3. Place the tip of the test pen in reliable contact with the voltage test point.
4. The meter will automatically switch between different voltage ranges (DC6V/60V/600V/1000V) based on the measured voltage and display the result on the LCD.
Note: The input voltage must not exceed DC1000V. Exceeding this limit may damage the meter circuit and pose a risk of electric shock. Always ensure the test leads are disconnected from the circuit under test after completing the measurement.
Add New Comment