User Manual Q&AAnswer
Feb 15, 2025 - 02:45 AM
To replace the bulb in the Verilux VT20 UV-Free Therapy Lamp, follow these steps:
1. Unplug the lamp from the power source.
2. Remove the lens cover by inserting a coin or your finger into the opening between the lens and the lamp body at the top of the lamp.
3. Gently pull the lens away from the lamp body, lifting slowly as you pull.
4. Unscrew the two blue thumb screws that hold the black bulb holder and the bulb itself.
5. Gently pull up the black bulb holder to expose the base of the bulb.
6. Holding the bulb at its base, gently lift out the old bulb, pulling it slowly and gently away from the lamp body as you lift it upward.
7. Remove the black bulb holder by lifting it over the top of the old bulb.
8. Place the black bulb holder over the top of the new bulb.
9. Gently insert the new bulb into the receptacle from which you removed the old bulb. A "click" sound will indicate the bulb is properly installed.
10. Lower the black bulb holder onto the bulb base. Reinstall the two blue thumb screws.
11. Replace the lens by inserting its base into the opening in the lamp base and then by aligning its top with that of the lamp base. Snap the lens into place.
Please refer to the Verilux VT20 UV-Free Therapy Lamp User Manual for more detailed instructions and safety precautions.
Add New Comment