How do I install the GREENLUX Premium EPR-EX2 Recessed LED Exit Sign? (GREENLUX EPR-EX2 Recessed LED Exit Sign Owner's Manual)

Answer

manuals.plus

Feb 15, 2025 - 02:43 AM

To install the GREENLUX Premium EPR-EX2 Recessed LED Exit Sign, please follow the steps below:

1. Ensure that the power supply is turned off before starting the installation process.

2. Determine the desired location for the exit sign. The sign should be installed in a location that provides clear visibility and meets the relevant safety regulations.

3. Remove the diffuser cover by gently pulling it downwards. This will expose the internal components of the exit sign.

4. Connect the exit sign to the power supply. The GREENLUX Premium EPR-EX2 features easy-connect installation, which simplifies the wiring process. Follow the wiring diagram provided in the owner's manual to connect the exit sign to the power source.

5. Secure the exit sign to the mounting surface using the appropriate screws or brackets. Ensure that the sign is securely attached and does not wobble or move.

6. Replace the diffuser cover by aligning it with the exit sign and pushing it upwards until it clicks into place. Make sure the diffuser cover is properly seated to ensure even light distribution.

7. Once the installation is complete, turn on the power supply and test the functionality of the exit sign. The GREENLUX Premium EPR-EX2 is designed for low power consumption and features a long-life LiFePO4 battery, ensuring reliable operation.

If you encounter any difficulties during the installation process or have any further questions, please refer to the GREENLUX Premium EPR-EX2 Recessed LED Exit Sign Owner's Manual for detailed instructions and troubleshooting tips.