User Manual Q&AAnswer
Feb 15, 2025 - 02:38 AM
To mount the Omnia VOLT HD Pro Version Broadcast Audio Processor in an equipment rack, follow these steps:
1. Gather the necessary items for installation, including the Omnia VOLT Audio Processor, AC Power Cable, RJ45 Studio Hub standard pinout AES Adaptors, 4 rack screws, a rack with an EIA rack space for mounting, a Philips screwdriver or xxxx gun, and standard XLR connectors if setting up a line-level analog audio source, and an Ethernet cable if setting up a Remote and/or Livewire connection.
2. Install the VOLT in your equipment rack using the 4 supplied screws. If using only two screws, make sure to install them in the bottom holes of the rack ears for proper stability.
3. Leave a blank space above and below the unit in the rack for proper ventilation and cooling.
4. Once the Omnia VOLT is securely mounted in the rack, proceed with the audio connections.
For more detailed instructions and illustrations, please refer to the Omnia VOLT HD Pro Version Broadcast Audio Processor Installation Guide provided with your purchase.
Add New Comment