User Manual Q&AAnswer
Feb 15, 2025 - 02:36 AM
To rack mount the Omnia VOLT AM Version Broadcast Audio Processor, follow these steps:
1. Gather the necessary items for installation, including the Omnia VOLT Audio Processor, AC Power Cable, RJ45 Studio Hub standard pinout AES Adaptors, 4 rack screws, a rack with an EIA rack space for mounting, and a Philips screwdriver or xxxx gun.
2. Install the VOLT in your equipment rack using the 4 supplied screws. If only two screws are used for installation, they MUST be installed in the bottom holes of the rack ears. Leave a blank space above and below the unit for proper ventilation and cooling.
3. Once the VOLT is securely mounted in the rack, proceed to the audio connections.
Note: For more detailed instructions and illustrations, please refer to the Omnia VOLT AM Version Broadcast Audio Processor Installation Guide provided with the product.
Add New Comment