User Manual Q&AAnswer
Feb 15, 2025 - 02:34 AM
To measure DC voltage with the NOYAFA NF-5320D digital multimeter, follow these steps:
1. Insert the black test lead into the "COM" jack and the red test lead into the "V/Ω" jack.
2. Ensure that the test leads are reliably in contact with the test point.
3. Press and hold the power button for more than 2 seconds to turn on the meter. The LCD will display "----" for automatic scanning.
4. The meter will automatically recognize the DC voltage and display the measurement value on the LCD.
5. Make sure not to exceed the input voltage of DC 1000V to avoid damaging the instrument circuit.
6. After completing the measurement, disconnect the test leads from the circuit under test.
Please refer to the NOYAFA NF-5320D user manual for more detailed instructions and safety precautions.
Add New Comment