How do I install the EGLO 205187A PASTORE 2 Ceiling Lamp? (EGLO 205187A PASTORE 2 Ceiling Lamp Instruction Guide)

Answer

manuals.plus

Feb 15, 2025 - 02:33 AM

To install the EGLO 205187A PASTORE 2 Ceiling Lamp, please follow the steps outlined in the manual provided with the product. Here is a step-by-step guide:

1. Safety Precautions:
- Before starting the installation, turn off the electrical power at the breaker panel (see fig. A).
- Ensure that the installation is carried out by a person familiar with the construction and operation of the product and the hazards involved.

2. Mounting the Ceiling Lamp:
- Remove the existing ceiling lamp if present.
- Attach the mounting bracket to the electrical box in the ceiling using the provided screws.
- Connect the wires from the electrical box to the wires of the ceiling lamp, matching the colors (black to black, white to white, and green or copper to green or copper).
- Secure the wire connections with wire nuts and wrap them with electrical tape for added safety.
- Gently tuck the wires into the electrical box and attach the ceiling lamp to the mounting bracket using the provided screws.

3. Finishing the Installation:
- Ensure that all connections are secure and properly insulated.
- Turn on the electrical power at the breaker panel to test the functionality of the ceiling lamp.
- Adjust the position of the lampshade or light bulbs if necessary.
- Enjoy your newly installed EGLO 205187A PASTORE 2 Ceiling Lamp!

Please note that the provided instructions are a general guide, and it is always recommended to refer to the specific manual provided with the product for detailed and accurate installation instructions.