User Manual Q&AAnswer
Feb 15, 2025 - 02:29 AM
To install the NEXT Audiocom W8 All-Weather Speaker, follow these steps:
1. Determine a suitable location for the installation and complete all wiring before installing.
2. The W8 can be installed on vertical walls and in ceilings if the chosen structure can withstand the weight long term.
3. Use only adequate screws and anchors (not included) for the surface you are installing to.
4. Disassemble the U-bracket from the W8 by unscrewing both xxxx grips and pushing the bracket outwards.
5. Using the U-bracket and a pencil, mark the hole spots for drilling in the desired position (30cm apart). Keep in mind the U-bracket only allows the W8 to rotate. Position it in a way that allows you to steer the W8 later for the desired coverage.
6. Mount the U-bracket on the wall using the correct screws and anchors for the surface in question (not included).
7. Reassemble the W8 with the U-bracket reversing the process done in step 4. Do not completely tighten the xxxx grips.
8. Select the power taps (8Ω or 100V), connect the cables to the speaker, aim it to the desired location, and tighten the xxxx grips.
For more detailed instructions and safety precautions, please refer to the user manual provided with the product.
Add New Comment