How do I connect the HOFTRONIC Flex Series RGB Dimmable LED Light Strip to the power cord? (HOFTRONIC Flex Series LED Light Strip User Manual)

Answer

manuals.plus

Feb 15, 2025 - 02:25 AM


To connect the HOFTRONIC Flex Series RGB Dimmable LED Light Strip to the power cord, follow these steps:

1. Find the anode and cathode of the strip light. The anode and cathode are the positive and negative terminals of the strip light.

2. Connect the power cord to the strip light by ensuring that the copper of the power cord meets the anode and cathode of the strip light.

3. Plug the power cord directly into the strip light and cover the connection by closing the clip. This will secure the connection between the power cord and the strip light.

4. Important: Make sure to connect a maximum of 100 meters per power cord. Exceeding this limit may cause issues with the performance of the LED light strip.

5. After connecting the power cord, cover the exposed/open end of the strip light with the plastic cap. This will protect the connection from moisture and ensure the strip light remains waterproof.

6. If you are installing the strip light outdoors, it is recommended to use the glue provided in the box. Apply the glue all the way around the end of the strip light, including the power cord connection and plastic cap. Allow the glue to dry completely. This will further enhance the waterproofing of the strip light.

Please note that the above instructions are a summary of the installation details provided in the HOFTRONIC Flex Series RGB Dimmable LED Light Strip user manual. For more detailed information and illustrations, refer to the user manual provided with the product.