User Manual Q&AAnswer
Feb 15, 2025 - 02:20 AM
To connect the BMS-LINK converter to your UP-Hi device and lithium battery, follow these steps:
1. Connect the BMS-LINK converter to the RS485 port of the all-in-one product and the lithium battery using an RJ45 communication cable.
2. Modify the lithium battery's default ID into the fixed ID through the DIP switch. Refer to the "BMS Lithium Battery Protocols & Fixed ID Table" in the user manual or contact technical support for the specific fixed ID for your battery manufacturer.
3. Modify the "PRO" parameter to set the BMS protocol number using the remote meter or PC software. Here is an example using the remote meter:
a. In the real-time interface, press and hold the UP+DOWN button for 2 seconds to enter the engineer's operation interface.
b. Use the UP/DOWN button to select the "PRO" parameter (item 40).
c. Press and hold the SET/ENTER button for 2 seconds to enter the parameter modifying interface.
d. Use the UP/DOWN button to modify the "PRO" parameter.
e. Press the SET/ENTER button to confirm the modification.
f. Press the ESC button to exit.
g. Restart the all-in-one product to ensure the BMS protocol number is successfully modified.
Please refer to the "BMS Lithium Battery Protocols & Fixed ID Table" in the user manual or contact technical support for the supported BMS manufacturers and protocols. Make sure to modify the lithium battery's default ID into the fixed ID before setting the protocol number.
For more detailed information and illustrations, please refer to the EPEVER BMS-LINK BMS Protocol Converter User Manual.
Add New Comment