User Manual Q&AAnswer
Feb 15, 2025 - 02:14 AM
To install the motherboard in the COOLER MASTER Masterbox MB511 RGB PC Case, please follow these steps:
1. Ensure that you have all the necessary tools required for the installation.
2. Open the side panel of the case by removing the screws holding it in place.
3. Locate the motherboard tray inside the case.
4. Align the xxxx holes on the motherboard with the standoffs on the motherboard tray.
5. Place the motherboard onto the standoffs and ensure that it is properly aligned with the I/O shield at the back of the case.
6. Use the provided screws to secure the motherboard onto the standoffs. Tighten the screws gently, but do not overtighten.
7. Connect the necessary cables from the motherboard to the corresponding ports on the case, such as the front panel connectors, USB headers, and audio connectors.
8. Once the motherboard is securely installed and all cables are connected, you can proceed with installing other components, such as the CPU, RAM, and graphics card.
For more detailed instructions and illustrations, please refer to the user guide that came with your COOLER MASTER Masterbox MB511 RGB PC Case.
Add New Comment