Answer

Feb 15, 2025 - 01:57 AM
To assemble and attach the BLACK WIDOW ATV-TINE-2145 Steel Tines ATV Implement, please follow these steps:
1. Inspect the product before use to ensure it is assembled properly and all parts are in safe working order and free of defects.
2. Gather all the necessary parts and hardware listed in the "Parts & Assembly" section of the manual.
3. Using the provided Hitch Pin (#3), hook the Landscape Rake to the 3-point hook up on your ATV.
4. Make sure to use the correct wrenches to inspect all nut and bolt assembly locations and snug up any that may be loose. Be careful not to crush tubing when tightening.
5. Always maintain proper balance and weight distribution of your ATV. You may need to add weight to the opposite end of the ATV to counterweight the load.
6. It is important to read and understand the manufacturer's warnings and instructions before using the ATV/UTV 3-Pin System. Always refer to your ATV's Owner's Manual regarding the use of aftermarket accessories and safe operation of your ATV.
7. Never exceed the manufacturer's weight rating of your ATV/UTV hitch. If you are unsure, always refer to the ATV/UTV Owner's Manual.
8. When operating or traveling with implements attached to your ATV, do not exceed 5 MPH. Excessive speeds can result in loss of control and can cause serious personal injuries or death.
9. Never operate your ATV/UTV on steep inclines while using the 3-Pin System, as tipping or roll-overs can occur.
10. Always keep hands and feet away from all implements while operating the ATV. Never get under or between any implement while operating the ATV.
11. Inspect the entire product for any rust, corrosion, cracks, freezing, excessive heat, or rotting damage that may affect the safety of your product. Discard any questionable product.
12. Inspect the entire product for any structural damage, paying close attention to all weld locations. If any damage is found, return the product to the factory for repair or discard it.
Please note that these are general guidelines and safety instructions. For more specific information and detailed instructions, refer to the product manual or contact the Authorized Dealer from whom you made the purchase.
Add New Comment