User Manual Q&AAnswer
Feb 15, 2025 - 01:37 AM
To ensure proper airflow in your Sub-Zero IC-24C or ICBIC-24C refrigerator, follow these steps:
1. Locate the evaporator fan blades inside the refrigerator compartment. These blades are responsible for circulating the cold air throughout the unit.
2. Take note of the fan motor shafts that the blades are attached to. These shafts should be visible once you remove any covers or panels that may be obstructing them.
3. Carefully push the evaporator fan blades onto the fan motor shafts fully. Make sure that the motor shafts touch the fan blade stop point. This ensures that the blades are securely attached and will rotate properly to circulate the air.
4. Double-check that the blades are firmly in place and properly aligned. They should not be loose or wobbly.
5. Once you have pushed the fan blades onto the motor shafts fully, you can replace any covers or panels that you removed earlier.
By following these steps, you will ensure that the evaporator fan blades are correctly attached to the fan motor shafts, allowing for proper airflow and optimal cooling performance in your Sub-Zero IC-24C or ICBIC-24C refrigerator.
For further assistance or more detailed instructions, you can refer to the product manual available on the Sub-Zero service website at service.subzero.com.
Add New Comment