,How do I set up my NETGEAR ‎R9000 Nighthawk X10 Smart WiFi Router? (Netgear Nighthawk X10 Smart WiFi Router User Manual)

Answer

manuals.plus

Feb 15, 2025 - 01:33 AM

To set up your NETGEAR ‎R9000 Nighthawk X10 Smart WiFi Router, follow these steps:

1. Connect the router to your modem: Use an Ethernet cable to connect the router's Internet port to your modem's Ethernet port.

2. Power on the router: Connect the router to a power source using the included power adapter. Press the power button located on the back of the router to turn it on.

3. Connect to the router's WiFi network: On your computer or mobile device, go to the WiFi settings and connect to the WiFi network named "NETGEAR-XX" (where "XX" represents the last two digits of the router's serial number).

4. Launch a web browser: Open a web browser on your device and enter "http://www.routerlogin.net" or "http://www.routerlogin.com" in the address bar. Press Enter.

5. Log in to the router: You will be prompted to enter the router's default username and password. By default, the username is "admin" and the password is "password". Enter these credentials and click the "Log In" button.

6. Follow the setup wizard: The setup wizard will guide you through the initial configuration process. It will prompt you to change the default admin password, select your time zone, and configure your internet connection. Follow the on-screen instructions and provide the necessary information.

7. Customize your settings: Once the initial setup is complete, you can customize various settings according to your preferences. The user manual provides detailed instructions on how to configure advanced features such as wireless settings, security options, guest networks, parental controls, and more.

For more detailed instructions and troubleshooting tips, refer to the NETGEAR ‎R9000 Nighthawk X10 Smart WiFi Router User Manual provided in the link you shared.