User Manual Q&AAnswer
Feb 15, 2025 - 01:25 AM
To install the powerbass AutoSound OE Series GM O.E.M. Plug and Play Speakers, follow these steps:
1. Remove the door panel or panel to gain access to the factory speaker.
2. Remove the 7mm bolt at the top of the speaker and keep it for installing the new speaker.
3. Unclip the factory speaker at the top and pull it forward. Carefully unplug the speaker and remove it from the vehicle.
4. Plug in the new speaker and clip it in, starting from the bottom first.
5. Securely mount the new speaker using the 7mm bolt. There may be optional mounting holes at the bottom of the speaker that require drilling new holes to use.
6. Reinstall the door panel or panel to complete the installation.
For specific instructions and illustrations, please refer to the powerbass AutoSound OE Series GM O.E.M. Plug and Play Speakers User Guide.
Add New Comment