User Manual Q&AAnswer
Feb 15, 2025 - 01:00 AM
To install the STIEBEL ELTRON HTE 4 Hand Dryer, follow these steps:
1. Choose a vertical wall that is temperature-resistant to over 90 °C.
2. Ensure that the specified minimum clearances are maintained.
3. Use the provided drilling template to mark the four mounting points on the wall, taking into account the length and position of the power cable.
4. Drill the fixing holes and insert rawl plugs.
5. Pull the power cable through the cable entry in the back panel of the appliance.
6. Fit the appliance onto the fixing screws using the keyhole fixings.
7. Secure the appliance to the wall using two more screws.
8. Connect the power cable to the appliance, ensuring that the wires are not near the fan motor.
9. Fit the casing cover onto the appliance and secure it with screws.
Please refer to the complete installation instructions in the user manual for more detailed information and illustrations.
Add New Comment