User Manual Q&AAnswer
Feb 15, 2025 - 12:56 AM
To install the Razor W15110710020 Vector Front Fender, please follow the steps below:
1. Gather the required tools: Two (2) 5 mm Allen wrenches and a Phillips screwdriver.
2. Ensure that the power switch is turned OFF and the charger is disconnected to avoid any potential shock or injury.
3. Using the two (2) 5 mm Allen wrenches, loosen and remove the axle bolts on the front wheel. Slide the wheel down to create space for the fender installation.
4. Using a Phillips screwdriver, loosen and remove the two (2) screws that hold the existing fender onto the fork. Slide the fender out from the fork.
5. Take the new Razor W15110710020 Vector Front Fender and align it with the fork. Insert the fender into the fork until it is securely in place.
6. Use the Phillips screwdriver to tighten the two (2) screws to hold the new fender onto the fork.
7. Slide the front wheel back into position and tighten the axle bolts using the two (2) 5 mm Allen wrenches.
8. Ensure that all screws and bolts are securely tightened.
For further assistance or clarification, you can visit the Razor website at www.razor.com or contact their toll-free customer support line at 866-467-2967, available Monday to Friday from 8:00 am to 5:00 pm Pacific Time.
Add New Comment