How do I replace the charger port on my Razor W15127016106 Vector? (Razor W15127016106 Vector Charger Port Instruction Manual)

Answer

manuals.plus

Feb 15, 2025 - 12:55 AM

Sure! Here are the step-by-step instructions on how to replace the charger port on your :

1. Gather the required tools: You will need a Phillips screwdriver, a flat screwdriver, and long needle pliers. Please note that these tools are not included with the scooter.

2. Safety precautions: Before starting any assembly or maintenance procedures, make sure to turn off the power switch and disconnect the charger. This is to avoid potential shock or other injuries. Failure to follow these steps in the correct order may cause irreparable damage.

3. Remove the battery cover: Using a Phillips screwdriver, remove the two screws from the battery cover on the right side of the unit. Set the screws aside in a safe place.

4. Disconnect the charger port connector: Locate the charger port connector, which is connected to the controller. Disconnect the charger port connector from the controller.

5. Remove the glue: Using a flat screwdriver, carefully remove the glue at the back of the charger port. This will allow you to access the charger port for removal.

6. Remove the lock nut: Using long needle pliers, remove the lock nut from the back of the charger port. Once the lock nut is removed, you can push the charger port out from the cover.

7. Replace the charger port: Take the new charger port and insert it into the cover. Make sure it is securely in place.

8. Reassemble the scooter: Reverse the steps you followed earlier. First, reattach the lock nut to the back of the new charger port. Then, use the flat screwdriver to apply glue to secure the charger port in place. Finally, reconnect the charger port connector to the controller.

9. Charge the battery: Before using the scooter, it is important to charge the battery for 8 hours. This will ensure optimal performance.

If you need further assistance or have any other questions, you can visit the Razor website at www.razor.com or call their toll-free number at 866-467-2967. Their customer support team is available Monday to Friday from 8:00 am to 5:00 pm Pacific Time.