How do I assemble and install the RL R50171980 WOODY Table Lamp? (RL R50171980 WOODY Table Lamp Instruction Guide)

Answer

manuals.plus

Feb 15, 2025 - 12:51 AM

To assemble and install the RL R50171980 WOODY Table Lamp, please follow these steps:

1. Safety Precautions:
- Before starting the assembly process, make sure to read and understand all the safety instructions provided in the manual.
- Ensure that the lamp is disconnected from the power source before handling or assembling any parts.

2. Unboxing:
- Carefully remove all the components from the packaging.
- Check if all the parts mentioned in the manual are included.

3. Lamp Base Assembly:
- Attach the lamp base to the lamp stand by aligning the holes on both parts.
- Insert and tighten the screws provided using a screwdriver or the tool recommended in the manual.

4. Lampshade Assembly:
- Place the lampshade on a flat surface.
- Gently attach the lampshade frame to the lamp base by aligning the notches or hooks.
- Ensure that the lampshade is securely attached to the lamp base.

5. Electrical Connection:
- Locate the power cord coming out from the lamp base.
- Connect the power cord to a suitable power outlet.
- Make sure the power switch is in the off position before plugging in the lamp.

6. Bulb Installation:
- Check the maximum wattage and bulb type recommended for the RL R50171980 WOODY Table Lamp.
- Unscrew the bulb holder located inside the lampshade.
- Insert the appropriate bulb into the holder, making sure it is securely fitted.
- xxxx the bulb holder back into place.

7. Lamp Operation:
- Turn on the lamp using the power switch.
- If the lamp has a dimmer or adjustable brightness settings, refer to the manual for instructions on how to adjust the light intensity.

Please note that the above instructions are a general guideline. For specific details and diagrams, refer to the instruction manual provided with the RL R50171980 WOODY Table Lamp.