User Manual Q&AAnswer
Feb 15, 2025 - 12:18 AM
To assemble the TRIO 504900104 Perry Table Lamp, please follow these steps:
1. Before starting the assembly, make sure to read the safety instructions provided in the manual.
2. Start by unpacking all the components of the lamp and ensure that you have all the necessary parts.
3. Locate the lamp base and place it on a stable surface. This will serve as the foundation for the lamp.
4. Take the lampshade and remove any protective packaging or covering.
5. Insert the lampshade onto the lamp base by aligning the notches or slots on the lampshade with the corresponding tabs or hooks on the lamp base. Gently push the lampshade down until it is securely attached.
6. Once the lampshade is attached, locate the lamp socket. This is where the light bulb will be inserted.
7. xxxx in a suitable E27 light bulb with a maximum wattage of 10W into the lamp socket. Make sure to use a bulb that is compatible with the lamp's voltage (230V) and frequency (50Hz).
8. After inserting the light bulb, connect the lamp to a power source using a suitable power cord.
9. Finally, switch on the lamp to test if it is working properly. If the lamp does not turn on, double-check the bulb and power connection.
For any further assistance or troubleshooting, please refer to the instruction manual provided with the TRIO 504900104 Perry Table Lamp.
Add New Comment