User Manual Q&AAnswer
Feb 14, 2025 - 11:45 PM
To fill the water tank of the MAGIO MG-321 Garment Steamer, follow these steps:
1. Remove the water tank by holding the side buttons on it and pulling it forward.
2. Pull down the cover of the water filling and carefully fill the water tank with cold water. Do not exceed the "MAX" mark. Do not use hot water.
3. Close the cover of the water filling.
4. Install the water tank back correctly and monitor the water level to prevent water shortages during use. Make sure not to use the device without water in the tank.
Note: It is recommended to use distilled water to extend the life of the appliance. Do not add perfumes, vinegar, starch, antiscale agents, ironing liquid, or other substances to the water.
For more detailed instructions and safety information, please refer to the MAGIO MG-321 Garment Steamer Instruction Manual.
Add New Comment