Answer

Feb 14, 2025 - 11:19 PM
To properly mount the audio-technica AT-ART20 Dual Moving Coil Stereo Cartridge onto your turntable, please follow these steps:
1. Ensure that you have a through-hole type headshell or a headshell-integrated tonearm, as this cartridge can only be mounted on these types of setups.
2. Before mounting the cartridge, make sure to use the provided protector to avoid damaging the cantilever and stylus tip.
3. Temporarily tighten the screws to secure the cartridge onto the headshell or tonearm.
4. Connect the lead tips from the headshell to the product's output terminals, ensuring correct polarity.
5. Remove the protector from the cartridge.
6. Determine the correct position for installing the cartridge by adjusting the overhang. You can refer to the tonearm's, turntable's, or headshell's user manual for instructions on how to adjust the overhang properly.
7. If you are unsure about the correct overhang position, you can align the stylus tip to the cartridge originally attached to the tonearm.
8. Finish tightening the screws, ensuring a balance between the left and right sides.
By following these steps, you should be able to properly mount the audio-technica AT-ART20 Dual Moving Coil Stereo Cartridge onto your turntable.
Add New Comment