User Manual Q&AAnswer
Feb 14, 2025 - 10:50 PM
To choose the correct wire diameter and gas flowrate for the WELDLINE LGS2 360G MIG-MAG Welding Torch, you need to consider the type of material you are welding and the welding parameters recommended by the manufacturer.
For steel and stainless steel, the recommended wire diameter range is 0.8mm to 1.6mm. You can choose the appropriate wire diameter based on the thickness of the material you are welding. Thinner materials generally require a smaller wire diameter, while thicker materials may require a larger wire diameter.
The gas flowrate should be set within the range of 10 lt/min to 18 lt/min. It is important to ensure adequate gas flow to protect the weld pool from atmospheric contamination and to provide proper shielding. The specific gas flowrate within this range can be adjusted based on the welding parameters and the recommendations provided by the manufacturer of the welding wire and gas.
Please refer to the manufacturer's instructions and guidelines for the specific welding parameters and recommendations for the WELDLINE LGS2 360G MIG-MAG Welding Torch.
Add New Comment