User Manual Q&AAnswer
Feb 14, 2025 - 10:38 PM
To install the Razor W13113290027 C25 Handlebar Kit, you will need a 4 mm Allen wrench (not included). Here are the step-by-step instructions:
Step 1: Turn off the power switch and disconnect the charger before starting any assembly or maintenance procedures. This is important to avoid potential shock or injury.
Step 2: Using a 4 mm Allen wrench, remove the four Allen screws and washers from the handlebar.
Step 3: Plug in the connector and slide the stem onto the Steer Tube. Be careful not to pinch the wire.
Step 4: Tighten the four handlebar screws and washers securely using the 4 mm Allen wrench.
If you need further assistance, you can visit the Razor website at www.razor.com or call their toll-free number 866-467-2967. Their customer support team is available Monday to Friday from 8:00 AM to 5:00 PM PST.
Add New Comment