User Manual Q&AAnswer
Feb 14, 2025 - 10:27 PM
To adjust the screens on the MONOPRICE 16248 Essential Quad Monitor Articulating Arm Desk Mount, follow these steps:
1. After installing the monitor plates and attaching the screens to them, you can adjust the position of each screen individually.
2. To adjust the height of the screens, use the height adjustment screws located on each arm. Loosen the screws and move the screens up or down to your desired height. Once in position, tighten the screws to secure the screens.
3. To tilt the screens, use the tilt adjustment knobs located on the back of each monitor plate. Loosen the knobs and tilt the screens forward or backward to your desired angle. Tighten the knobs to lock the screens in place.
4. To swivel the screens, use the swivel adjustment knobs located on the sides of each monitor plate. Loosen the knobs and swivel the screens left or right to your desired position. Tighten the knobs to hold the screens in place.
5. You can also rotate the screens from landscape to portrait orientation by loosening the rotation adjustment knobs on the back of each monitor plate. Rotate the screens to the desired orientation and tighten the knobs to lock them in place.
Please note that the weight of the screens should not exceed the maximum weight capacity of the mount, which is 22 lbs. Make sure to check the installation every two months to ensure all screws are tight and secure. If you have any further questions or concerns, it is recommended to contact a professional installer for assistance.
Add New Comment