How do I start a wash cycle on the Hotpoint NM11946GCAUKN Washing Machine? (Hotpoint NM11946GCAUKN washing machine User Manual)

Answer

manuals.plus

Feb 14, 2025 - 10:21 PM

To start a wash cycle on the Hotpoint NM11946GCAUKN Washing Machine, follow these steps:

1. Ensure that the washing machine is plugged into a power outlet and the water tap is open.
2. Press the ON/OFF button to turn on the washing machine. The indicator light for START/PAUSE will flash slowly green.
3. Open the door and load the laundry into the drum, making sure not to exceed the maximum load quantity indicated in the wash cycle table.
4. Pull out the detergent dispenser drawer and pour the appropriate amount of detergent into the relevant compartments as described in the "DETERGENT DISPENSER DRAWER" section of the manual.
5. Close the door.
6. The machine will automatically display the maximum temperature and spin speed values for the selected cycle. You can adjust these values by pressing the °C button to change the temperature and the SPIN button to change the spin speed.
7. Select the desired wash cycle by turning the WASH CYCLE SELECTOR xxxx to the appropriate setting.
8. Select any desired options such as Extra Rinse, Extra Touch, Delay, °C Temperature, or Spin by pressing the corresponding buttons.
9. Press the START/PAUSE button to start the wash cycle. The indicator light for START/PAUSE will light up steady green, and the door will lock.
10. The wash cycle will run according to the selected settings. The display will show the duration of the cycle and the remaining time. You can pause the cycle by pressing the START/PAUSE button again, and resume it by pressing the button again.

Note: For more specific instructions on each wash cycle and its suitability for different types of garments, refer to the "WASH CYCLES" section of the manual.