How do I install the IKEA 494.298.73 Eket Wall-Mounted Cabinet Combination? (IKEA 494.298.73 Wall-Mounted Cabinet Combination Instruction Manual)

Answer

manuals.plus

Feb 14, 2025 - 10:20 PM


To install the IKEA 494.298.73 Eket Wall-Mounted Cabinet Combination, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:

1. Start by identifying the wall where you want to mount the cabinet combination. Ensure that the wall is suitable for mounting and can support the weight of the cabinets.

2. Measure and mark the desired height for the cabinets on the wall. Use a level to ensure the markings are straight.

3. Locate the wall studs or use appropriate wall anchors for secure mounting. The manual should provide guidance on the recommended type of wall anchors based on your wall type.

4. Attach the included mounting brackets to the back of the cabinets. The manual should specify the exact placement of the brackets and the required screws.

5. Position the cabinets on the wall, aligning them with the markings made earlier. Make sure the cabinets are level and adjust as needed.

6. Securely attach the cabinets to the wall by screwing through the mounting brackets into the wall studs or wall anchors. Use the recommended screws provided in the manual.

7. Once all the cabinets are mounted, double-check their alignment and stability.

Please note that the above instructions are a general guide. It is crucial to refer to the specific instruction manual for the IKEA 494.298.73 Eket Wall-Mounted Cabinet Combination for detailed and accurate installation steps.