User Manual Q&AAnswer
Feb 14, 2025 - 10:18 PM
To fill the water tank of the beper P204FER200 Travel Iron, follow these steps:
1. Make sure the iron is unplugged from the socket and the thermostat is set to the minimum position.
2. Lift the tank lid located at the back of the iron.
3. Slowly fill the tank with water using a small glass or funnel. Do not exceed the maximum level indicated on the tank.
4. After filling the tank, close the lid securely.
5. Reconnect the plug to the electrical socket.
Note: The iron is designed to use tap water, but if the water is very hard, it is recommended to use a mixture of distilled water and tap water. It is also recommended to empty the water tank after each use to avoid the formation of limescale, mold, and bad smells.
Add New Comment