Answer

Feb 14, 2025 - 10:15 PM
To connect your YBA Passion PRE550 MKII Pre Amplifier to your power amplifier, follow these steps:
1. Locate the RCA1/RCA2 output on the back of your PRE550 MKII.
2. Connect the RCA outputs of your PRE550 MKII to the RCA inputs of your power amplifier.
3. Be sure to connect the RIGHT output of your PRE550 MKII to the R input of your power amplifier and the LEFT output to the L input of your power amplifier.
Please refer to the "Back view" section of the owner's manual for a visual representation of the connections.
Note: If your power amplifier has balanced inputs, you can use the Balanced Audio output of your PRE550 MKII instead of the RCA outputs for higher quality and noise rejection. Make sure to wire the XLR connectors correctly: Pin 1 - Ground, Pin 2 - Hot (in-phase), Pin 3 - Cold (phase-inverted).
For further assistance or clarification, please consult the owner's manual or contact the YBA authorized dealer from whom you purchased the product.
Add New Comment