User Manual Q&AAnswer
Feb 14, 2025 - 09:50 PM
To connect the PixLite 4 Mk2 controller to your lighting console or computer lighting software, you will need to use Ethernet data. The controller supports Streaming ACN (sACN / E1.31) or Art-Net data. You can connect the Ethernet data via a standard network cable into the RJ45 Ethernet jack located on the right-hand side of the unit. Make sure to configure your lighting console or software to output the correct protocol (sACN or Art-Net) and set the IP address of the controller accordingly. For more detailed information on network configuration, please refer to the "Network Configuration" section of the user manual.
Add New Comment