User Manual Q&AAnswer
Feb 14, 2025 - 09:29 PM
To connect the NIBE ELK 26 Electric Heater to your NIBE climate unit, you will need to follow the specific instructions based on the compatible product you have. Here are the general steps:
1. Determine the compatible products: The NIBE ELK 26 Electric Heater can be connected directly to certain products, such as F1345, F1355, SMO 20, SMO 40, and SMO S40. For other products like S1155, S1255, VVM S320, F1145, F1155, F1245, F1255, VVM 225, VVM 320, VVM 310, and VVM 500, you will need to use the appropriate accessory (AXC 40, DEH 310, or DEH 500).
2. Locate the terminal blocks: The ELK 26 has terminal blocks labeled X1 and X2. These will be used for the electrical connections.
3. Follow the specific electrical connection instructions: Depending on your compatible product, you will need to refer to the electrical connection diagrams provided in the manual. These diagrams will show you how to connect the ELK 26 to the terminal blocks or accessory boards of your specific product.
4. Ensure proper electrical installation: It is important to have all electrical connections carried out by an authorized electrician. The electrical installation and wiring must be done in accordance with the regulations in force.
5. Set up program settings: After the installation, you may need to set up program settings for the ELK 26. These settings can be performed via the start guide or directly in the menu system of your compatible heat pump or indoor module. Refer to the manual for your specific product to find the appropriate menu options and settings.
Please note that these are general instructions, and it is essential to refer to the specific instructions provided in the manual for your NIBE ELK 26 Electric Heater and compatible product.
Add New Comment