How do I start a wash cycle on the Hotpoint NSWF 945C W UK N Washing Machine? (Hotpoint NSWF 945C W UK N washing machine User Guide)

Answer

manuals.plus

Feb 14, 2025 - 09:27 PM

To start a wash cycle on the Hotpoint NSWF 945C W UK N Washing Machine, follow these steps:

1. Press the ON/OFF button to turn on the machine. The START/PAUSE indicator light will flash slowly green.
2. Open the door and load the laundry, making sure not to exceed the maximum load quantity indicated in the wash cycle table.
3. Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in the "DETERGENT DISPENSER DRAWER" section of the user guide.
4. Close the door.
5. The machine will automatically display the maximum temperature and spin speed values for the selected cycle. You can adjust the temperature by pressing the °C button and the spin speed by pressing the SPIN button.
6. Select the desired wash cycle by turning the WASH CYCLE SELECTOR xxxx .
7. Select any desired options by pressing the corresponding buttons, such as Extra Rinse or Delay Start.
8. Press the START/PAUSE button to start the wash cycle. The indicator light will light up steady green, and the door will lock.
9. The cycle duration and remaining time will be displayed on the screen. You can also check the maximum spin speed and temperature values by pressing the corresponding buttons.

Note: If you need to pause the wash cycle, press the START/PAUSE button again. To open the door while a cycle is in progress, pause the cycle first by pressing the START/PAUSE button, and then press it again to continue the cycle.

For more detailed information and troubleshooting, please refer to the Hotpoint NSWF 945C W UK N Washing Machine User Guide.