User Manual Q&AAnswer
Feb 14, 2025 - 09:23 PM
To pair the remote control with the fan, follow these steps:
1. Turn on the power supply switch and listen for a short "beep" sound.
2. Quickly press the "positive and negative key" on the remote control until you hear a long "beep" sound. This indicates that the pairing is successful.
3. If you don't hear the "beep" sound, the pairing has failed. In this case, turn off the power for 2 minutes and repeat the operation.
Note: If you have multiple fans and want to pair one remote control with two fans, you can pair the remote control to each fan one after the other using the same steps mentioned above.
If you have already paired the remote control with two fans and want to pair it with only one fan, you will need to repeat the pairing operation for each ceiling fan with its respective remote control.
Add New Comment