User Manual Q&AAnswer
Feb 14, 2025 - 09:12 PM
To install the Olimpia Splendid Noirot Spot Plus Wi-Fi Electric Convection Panel Heater, follow these steps:
1. Wall Installation:
- Remove the wall bracket from the heater by pushing down on the spring-loaded clips located at the top of the bracket.
- Fit the wall bracket to the wall using suitable fixing methods according to the surface you are mounting the heater on.
- Place the heater onto the bracket and clip it into position.
2. Panel Locations:
- This heater is suitable for use in all rooms, including Zone 2 in bathrooms, in accordance with AS/NZS 3000: 2018 (Wiring Rules).
- For use in the bathroom, it must be located so that the controls cannot be touched by a person in the bath or shower.
3. Mounting Castors:
- If you prefer to use castors instead of wall installation, follow the instructions provided.
- Space the castors at 50mm from the edge of the base for maximum stability.
- To lock the castors into place, insert the black clips provided through the bottom of the castors into the base of the heater.
Please refer to the instruction manual for detailed illustrations and further information on installation.
Note: It is important to comply with safety guidelines and local regulations when installing the heater. If you have any doubts or concerns, it is recommended to consult a qualified professional for assistance.
Add New Comment