Answer

Feb 14, 2025 - 09:02 PM
To adjust the brakes on your AL-KO 254x54 EL Electric Braked Axles, follow these steps:
1. Locate the small opening covered by a protective plug at the back of the brake backing plate.
2. With the trailer wheels off the ground, use a screwdriver or adjusting tool to rotate the star wheel inside the opening.
3. Rotate the star wheel until the brake drag makes it difficult to turn the wheel (the road wheel is almost locked up).
4. Then, turn the star wheel in the opposite direction to allow the trailer wheel to turn 3/4 to 1 revolution freely when spun (the brakes should drag lightly, but the road wheel should spin freely for about 1 revolution before stopping on its own).
It is recommended to perform this brake adjustment procedure between the first 300 to 1000 kilometers and then at the service intervals recommended in the periodic maintenance schedule provided in the manual.
Please note that this is a general guide, and for more detailed instructions and specific information, it is advisable to refer to the AL-KO 254x54 EL Electric Braked Axles Instruction Manual.
Add New Comment