How do I install the PARMCO WM10WF02 10KG Washing Machine? (PARMCO WM10WF02 10kg washing machine User Manual)

Answer

manuals.plus

Feb 14, 2025 - 08:31 PM

To install the PARMCO WM10WF02 10KG Washing Machine, follow these steps:

1. Remove all the packing materials, including the foam base, to prevent vibration and noise during operation.
2. Dispose of all packaging materials safely, as they can pose a suffocation hazard to children.
3. Ensure that you have received all the accessories mentioned in the manual.
4. Remove the transit bolts at the back of the machine using the provided tools. Plug the holes with the transit bolt caps.
5. Place the washing machine on a concrete floor, as it is less prone to vibration during the spin cycle. Make sure the machine is level and securely positioned, with a distance of more than 10 cm between the machine and the wall.
6. Adjust the machine's level by turning the locknut in a clockwise direction using a spanner. Hold the adjust feet securely with a pipe wrench and turn the locknut again until it sits firmly against the housing.
7. Connect the drain hose to a standpipe or a suitable drainage system. Ensure that there is an air break between the drain hose and the standpipe to prevent waste from entering the machine.
8. Connect the inlet hose supplied with the machine to a tap with a 3/4" thread. If there are two inlet valves, one should be connected to a cold water supply and the other to a hot water supply.
9. Make sure the power socket is grounded reliably and insert the power plug into the socket.
10. Before using the machine for the first time, run a complete cycle without clothes to remove any water left in the tub during manufacturing.

Please refer to the user manual for more detailed instructions and diagrams.

Note: It is always recommended to consult a qualified electrician or technician for installation to ensure safety and compliance with local regulations.