User Manual Q&AAnswer
Feb 14, 2025 - 08:30 PM
To change the temperature setting on the wireless remote control, follow these steps:
1. Press the "+" or "-" keys to display the most recently transmitted temperature.
2. If you want to adjust the temperature, press any other key to change it in 0.5 °C steps.
3. The temperature can be adjusted between OFF, 20 °C, and 60 °C. However, if a temperature limit is set in the appliance, it will remain effective.
4. If you want to shut down the heating system, set a temperature of 20 °C and then press "-" again.
5. The required temperature will be transmitted approximately 0.5 seconds after the last key is pressed. The progress bar on the display indicates that data is being transmitted.
Note: The wireless remote control goes into energy-saving mode shortly after the last setting has been made, and the display is switched off. The most recently transmitted temperature is still retained in energy-saving mode.
Please refer to the STIEBEL ELTRON FFB 4 Series Wireless Remote Control Instruction Manual for more detailed instructions and safety information.
Add New Comment