Answer

Feb 14, 2025 - 08:26 PM
To install the FLEXISPOT E7LB L-Shaped Standing Desk, please follow the steps outlined in the installation guide provided with the product. Here is a summary of the installation process:
Step 1: Install the supporting beam, auxiliary beam, and lifting columns. Use the provided wrench to tighten the screws.
Step 2: Install the feet and lifting columns together using the wrench to tighten the screws.
Step 3: Install the auxiliary beam and supporting plate.
Step 4: Connect all the cables onto the control box.
Step 5: Install the tabletop, hand switch, and control box.
Step 6-A: Install the cable management tray. xxxx the screws into the supporting beam and buckle one side of the cable management tray into the xxxx . Press the other side into the xxxx and lock it with the Allen Key. Repeat the same process for the auxiliary beam.
Step 6-B: Install the cable management tray on the auxiliary beam in the same way as in Step 6-A.
For more detailed instructions and diagrams, please refer to the installation guide provided with the product.
Note: If you encounter any issues during the installation process or have any other questions, please contact customer service for assistance.
Add New Comment