User Manual Q&AAnswer
Feb 14, 2025 - 08:22 PM
Here are the steps to install the Alphatec DB9.0043 AC Wallbox Power 22kW with key switch:
1. Remove the cover of the charging station.
2. Open 2 screws from the bottom side and 2 screws from the topside to remove the door.
3. Fix the box to the wall using 4 screws. Use the enclosed screws and plastic dowels depending on the wall material.
4. Connect the power source to the clamps according to local standards and laws. Ensure that the connections are tight and correct.
5. Position the cover on the top side of the basic part and close it by pushing it down. Close the 4 screws after the lid is in position.
6. Fix the cover with 2 screws from the rear. The cover must be closed completely and without any visible distance to the base.
Please note that installation and maintenance should only be carried out by qualified electrical contractors. It is important to follow all safety guidelines and regulations mentioned in the instruction manual.
Add New Comment