User Manual Q&AAnswer
Feb 14, 2025 - 08:20 PM
The Sprecher Schuh CA7 contactors come with a variety of components for installation. The included components are a hinged cover, a backpan pre-drilled for listed arrangements (not tapped), two ground lugs and a symbol label, two 22mm knockouts for pilot devices, a CEP7-1ERA overload reset adapter, an MR7 reset kit for the cover, two 22mm knockouts for reset, dual conduit knockouts, and mounting screws. The enclosure does not include wire.
To install the contactors, follow the instructions provided in the instruction manual. Make sure to mount the contactors securely using the provided mounting screws. Connect the necessary wires to the contactor terminals according to the wiring diagram and your specific application requirements. Ensure that all connections are secure and properly insulated.
For more detailed installation instructions and information on specific configurations and accessories, refer to the Sprecher Schuh CA7 Contactors Instruction Manual.
Add New Comment