User Manual Q&AAnswer
Feb 14, 2025 - 08:10 PM
To charge the Einhell Power X-Twincharger 3.0 A Charger, follow these steps:
1. Make sure the mains voltage is the same as that marked on the rating plate of the charger.
2. Insert the power plug of the charger into a socket outlet. The green LEDs will start flashing.
3. Pull the battery pack out of the equipment by pressing the push lock button.
4. Insert the battery pack(s) into the battery charger.
5. The charger indicator LEDs will show the charging status. Refer to the "Charger indicator" section in the instruction manual for a detailed explanation of the LED indicators.
6. If the battery fails to charge, check the voltage at the socket outlet and ensure there is good contact at the charging contacts of the charging unit.
7. If the battery still fails to charge, contact the customer service center with the charging unit and the rechargeable battery.
Please note that the charger is only allowed to be used for the lithium-ion batteries of the Power-X-Change series.
Add New Comment