User Manual Q&AAnswer
Feb 14, 2025 - 04:56 AM
To connect the tuya T00000044 Water Leak Detector to a Zigbee network, please follow these steps:
1. Detach the cover of the detector by twisting it counter clockwise.
2. Insert one CR123A battery, making sure to respect the polarities.
3. Put the plastic disc back in place (it fits only one way) and close the casing by twisting it clockwise.
4. The Water Leak Detector will start searching for a Zigbee network to join, which can take up to 15 minutes.
5. Make sure that the Zigbee network is open for joining devices and will accept the Water Leak Detector.
6. While the Water Leak Detector is searching for a Zigbee network to join, the LED will flash red.
7. When the LED stops flashing, it means that the Water Leak Detector has successfully joined the Zigbee network.
Please note that it is important to ensure that the Zigbee network is open for joining devices and that the Water Leak Detector is within range of the network.
Add New Comment