How do I replace the controller on my Razor W13112144015 Power Core E90 Sprint? (Razor W13112144015 Power Core E90 Sprint Controller Instruction Guide)

Answer

manuals.plus

Feb 14, 2025 - 04:47 AM


To replace the controller on your Razor W13112144015 Power Core E90 Sprint, follow these steps:

1. Make sure the power switch is turned OFF and disconnect the charger before starting any assembly or maintenance procedures to avoid potential shock or injury.

2. Gather the required tools, which include a Phillips screwdriver (not included).

3. Using the Phillips screwdriver, remove the five screws from the side of the scooter with the power switch.

4. Carefully pull off the cover, being cautious not to damage the wires for the charger port and power switch. Set the cover aside.

5. Using the Phillips screwdriver, remove the two screws that hold the controller onto the frame.

6. Disconnect all connectors from the controller and remove the controller from the scooter.

7. To install the new controller, reverse the above procedures. Connect all connectors to the new controller and secure it onto the frame using the two screws.

8. Place the cover back on and secure it with the five screws.

9. Once the replacement is complete, remember to charge the battery for 12 hours before using the scooter.

If you need further assistance, you can visit the Razor website at www.razor.com or call their toll-free number at 866-467-2967. Their customer service is available Monday to Friday from 8:00 am to 5:00 pm Pacific Time.