User Manual Q&AAnswer
Feb 14, 2025 - 04:39 AM
To mount the Janitza JPC 100-WEB Smart Energy Panel, follow these steps:
1. Ensure that your device matches the installation instructions and read and understand the documents associated with the product.
2. Cut a hole in the wall with dimensions of 261 ±1 mm x 164 ±1 mm (10.27 ± 0.04 in x 6.46 ± 0.04 in).
3. The device is suitable for installation in walls with a maximum thickness of 3 mm (0.12 in).
4. Place the device into the prepared installation cutout from the front.
5. Insert the retaining brackets into the openings on the device provided for this purpose.
6. Push the retaining brackets towards the back until they are flush with the back of the opening.
7. Insert the fastening screws included in the delivery into the retaining brackets.
8. Fasten the device by tightening the fastening screws. Observe the tightening sequence: First the upper, then the middle, and then the lower retaining brackets. The maximum tightening torque is 0.25 to 0.3 Nm (2.21 to 2.66 lbf·in).
It is important to follow these instructions to ensure proper mounting and avoid any damage to the device. For more detailed information, please refer to the user manual provided by Janitza electronics GmbH.
Add New Comment