User Manual Q&AAnswer
Feb 14, 2025 - 04:24 AM
To install the ADE MZ10023-1 Telescopic Height Measuring Rod on a wall, please follow these steps:
1. Carefully measure 56 cm from the floor and mark the wall.
2. Pull out the height rod to its full length.
3. Place the height measure over the marking at the hole beneath the 60 cm point on the height measure.
4. Use a spirit level to align the height rod and mark the wall at the second fix point at 122.5 cm.
5. Drill holes right at the marking and use the supplied dowels.
6. Slide a washer over one of the screws and insert the xxxx through the lower hole of the measuring rod from the printed side.
7. Repeat the previous step with the second xxxx using the upper hole.
8. Place the two spacers over the screws.
9. Place the two screws into the dowels.
10. Carefully tighten both screws to secure the height rod to the wall.
Please refer to the "Assembling to the wall" section in the ADE MZ10023-1 Telescopic Height Measuring Rod User Manual for more detailed instructions and illustrations.
Add New Comment