User Manual Q&AAnswer
Feb 14, 2025 - 04:22 AM
To install the Schneider Electric EVH4S03N2 EVlink Home Smart Wallbox, follow these steps:
1. Ensure that the installation is carried out by a qualified electrician.
2. Before installation, carefully inspect the device for any damage. Do not install if it is damaged.
3. Disconnect the mains power supply before working on the charger.
4. Use a voltage tester to ensure that the power supply is disconnected.
5. Follow the provided wiring diagram to connect the shunt trip release (Mx) to the charger.
6. Connect the power supply to the charger.
7. Secure the charger's inspection hatch.
8. Clamp the charger's power cable.
9. Mount the charger onto the screws and bracket.
10. Fix the bracket to the charger.
11. If desired, install the optional anti-tripping system.
12. Reconnect the power supply.
Please note that these are general installation instructions. It is important to refer to the specific instructions provided in the user manual for your model of the Schneider Electric EVlink Home Smart Wallbox.
Add New Comment