How do I assemble and install the TRIO 212060142 LUNGA Wall Lamp? (TRIO 212060142 LUNGA Wall Lamp Instruction Guide)

Answer

manuals.plus

Feb 14, 2025 - 04:05 AM

To assemble and install the TRIO 212060142 LUNGA Wall Lamp, please follow these steps:

1. Safety Precautions: Before starting the assembly, make sure to read and understand all the safety instructions provided in the manual.

2. Gather the necessary tools: You will need a screwdriver and possibly a drill with appropriate drill bits, depending on your wall type.

3. Electrical Connection: Ensure that the power supply is switched off before connecting the lamp to the electrical circuit. The TRIO 212060142 LUNGA Wall Lamp is designed for a 230V 50Hz power supply and uses one E27 Max. 40w bulb. Make sure to use a compatible bulb within the specified wattage.

4. Mounting the Lamp: Decide on the desired location for the wall lamp and mark the position for mounting. Use the provided screws and wall plugs to securely attach the lamp base to the wall. If necessary, use a drill to create holes for the wall plugs.

5. Wiring: Connect the lamp's wires to the electrical circuit according to the national regulations and standards. If you are unsure about the wiring, it is recommended to consult a qualified electrician.

6. Lampshade Installation: Attach the lampshade to the lamp base by carefully aligning the notches or screws provided. Make sure it is securely fastened.

7. Final Checks: Double-check all connections and ensure that the lamp is firmly mounted to the wall. Once everything is in place, switch on the power supply to test the lamp.

For more detailed instructions and diagrams, please refer to the official TRIO 212060142 LUNGA Wall Lamp manual available on the trio-lighting.com website.