User Manual Q&AAnswer
Feb 14, 2025 - 04:03 AM
To install the CombiSteel 7074 Series Refrigerator/Freezer, please follow these steps:
1. Position the appliance on a flat and stable surface.
2. If the unit has been stored or moved in a non-upright position, let it stand upright for approximately 12 hours before operation.
3. Remove the appliance from the packaging and ensure that all protective plastic film and coatings are thoroughly removed from all surfaces.
4. Maintain a distance of 20cm (7 inches) between the unit and walls or other objects for proper ventilation. Increase this distance if the obstacle is a heat source.
5. Set the brakes on the castors to keep the appliance in position or level the appliance by adjusting the xxxx feet. The cabinet is supplied with legs that can be adjusted.
6. Before using the appliance for the first time, clean the shelves and interior with soapy water.
Please refer to the user manual for more detailed instructions and illustrations on the installation process.
Add New Comment